Rinse aid replenishment indicator
Top up with rinse aid when the rinse aid control light on the control panel flashes (approx. 70 - 80 ml).
Tighten firmly the cover.
Clean up any rinse aid spilt during filling with an absorbent cloth to avoid excess foaming during the next wash.
Setting the rinse aid quantity to be added
The correct dosage of the rinse-aid should be regulated on the basis of the shine and drying results. For this purpose, set the quantity of liquid by means of the six-position selector (C) located on the inside of the filler opening (minimum quantity is position 1, maximum quantity is position 6). Use the tip of a knife or a screwdriver to rotate the selector. If drops of water or white marks remain on the crockery after it has been washed, gradually increase the dosage. If the crockery comes out with whitish, sticky streaks, reduce the dosage.
