Operating instructions
Use of "3 in 1" combi detergents
General advice
These products are detergents with integrated and combined
1.Before using these products you should first check that the water hardness in your supply is compatible with the use of these products as per the detergent manufacturers (on the product packaging).
2.These products should be strictly used according to the detergent manufacturers instructions.
3.If you encounter problems when using 3 in 1 products for the first time then please contact the detergent manufacturers care line (the telephone number is given on the product packaging).
Special advice
When using combination 3 in 1 products select the lowest possible setting for water hardness.
If you decide to turn back to the use of the standard detergent system we advise that you:
●Refill both the salt container and rinse aid dispenser.
●Switch the water hardness setting to the highest possible position and run from 1 to 3 normal washing programmes without a load.
●Readjust the water hardness setting again according to the hardness of the water in your area.
25
