AEG 44060 VIL manual Water inlet hose with safety valve

Models: 44060 VIL

1 48
Download 48 pages 33.6 Kb
Page 42
Image 42
Water inlet hose with safety valve

Installation instructions

Water inlet hose with safety valve

After connecting the double-walled water inlet hose, the safety valve is next to the tap. Therefore the water inlet hose is only under pressure while the water is running. If the water inlet hose starts to leak during this operation, the safety valve cuts off the running water.

Please take care when installing the water inlet hose:

-The electrical cable for the safety valve is in the double-walled water inlet hose. Do not immerse the water inlet hose or the safety valve in water.

-If water inlet hose or the safety valve is damaged, remove the mains plug immediately.

-A water inlet hose with safety valve must only be replaced by a specialist or by the consumer services department.

-Place the water inlet hose in such a way that it is never higher than the bottom edge of the safety valve.

42

Page 42
Image 42
AEG 44060 VIL manual Water inlet hose with safety valve