Installation instructions
Electrical connection
Information concerning the electrical connection is given on the rating plate on the edge of the dishwasher’s door.
Before plugging the appliance into the wall socket, make sure that:
1.The mains voltage and current rating at the site of installation match the nominal voltage and current rating given on the rating plate.
2.The meter, fuses, mains power supply and wall socket can all take the maximum load required. Make sure that the socket and plug are compatible without having to use any type of adaptor. If necessary, have the domestic wiring system socket replaced.
To isolate the dishwasher from mains, remove the mains plug.
Important!
The plug must still be accessible after the appliance has been installed.
In case that the electrical cable has to be replaced, please contact your local consumer services department.
The appliance should not be connected to the electrical supply by means of an extension cable.
Safety standards require the appliance to be earthed.
The manufacture accepts no liability for failure to observe the above safety precautions.
44
