Operating instructions
a) Setting manually
1.Open the dishwasher door.
2.Remove the lower basket from the dishwasher.
3.Turn the water hardness switch to
position 1 or 2 (see table).
4. Replace the lower basket.
The dishwasher is factory set at position 2.
AA07
b) Setting electronically
(The dishwasher must be switched off) The dishwasher is factory set at level 5.
1.Press the On/Off push button. All programme selection push buttons indicator lights will illuminate (setting mode).
If only one programme selection push button indicator light is illuminated, this means that a washing programme has been selected.
The programme must be cancelled: press simultaneously the function push buttons 2 and 3 for about 2 seconds, the indicator light of the setted programme push button starts flashing for about 2 seconds.
After about 2 seconds the indicator lights of all the programme selection push buttons will illuminate indicating that the setted programme has been cancelled and that the machine is now in setting mode.
2.Press simultaneously function push buttons 2 and 3, until the indicator lights of the function push buttons 1, 2 and 3 start flashing.
3.Press the function push button 1, the indicator lights of function push buttons 2 and 3 turn off while the indicator light of the push button 1 goes on flashing, at the same time the "end of programme" indicator light illuminates, along with a sequence of audible signals.
The current level is indicated by the number of flashes of the
"end of programme" indicator light and of audible signals heard.
Example:
5 flashes + 5 audible signals = level 5.
11
