AEG 56609 operating instructions Cleaning and maintenance, Cleaning the condenser

Cleaning and maintenance

Cleaning and maintenance

Cleaning the condenser

1 Important! It is essential to clean the condenser after every thirty

drying processes. Otherwise your dryer might suffer damage. Furthermore, energy consumption is greater when the condenser is covered with fluff.

0Open the fill-in door.

0Press on the two tabs to unlatch and

take off the base mask.

0Turn the two securing disks through a quarter turn each outwards.

0Pull the condenser out of the base by the

handle.

0Clean the condenser, best with a hand- held brush or by rinsing-through

strongly with a hand-held shower head. The water removal slits on the rear of the condenser must be free too.

1 Important! Do not use any sharply pointed objects to clean the condenser. They could make it leak.

0Reinsert and latch the condenser again (turn each one of the two securing disks through a quarter turn inwards). The legend "top – oben – en haut" must be at the top.

0Re-mount the base mask.

1 Important! The dryer must not be operated without condenser.

24