Changing-over the door stop | AEG 56609 guide

Changing-over the door stop

Changing-over the door stop

If the door stop does not suit the local conditions, it can be changed over.

1 Warning! Before changing-over the door stop,disconnect the mains plug; if the installation is permanent: Screw-out the fuse or switch-off the circuit breaker.

Proceed as follows to change-over the door stop:

A C B

F

H

F

E

D

J JGG

E

A C B

0Unscrew screws A at the front of the appliance.

0Remove the door by sliding it sideways.

0Unscrew screws B on the inside of the door and remove hinges C.

0Unscrew locking pin D and remove it.

0Release covers E, F and G by pushing on the catch with a thin screwdriver, push sideways, remove them and insert them on the opposite side.

0Screw hinges C and the locking pin D onto the opposite side of the door.

0Unscrew door lock H and remove it.

29

Image 29

AEG 56609 operating instructions Changing-over the door stop

Contents

Lavatherm 56609 Exclusiv Please read these operating instructions through carefully Dear customer Content Content General safety 1Safety instructions Utilisation in accordance with the intended purpose Safety of children Installation and connection General information Dispose of the packaging material Disposal Pre-drying Drying process Environmental protection tips Fill weight Duration Power Drying program Front view Construction of the appliance Operator control mask Program selector Before the first drying process Brief operating instructions Preparing the laundry DryingOpen the fill-in door Fill-in the laundry Start the drying program Switch-off the dryer Take-out laundry or put-in laundry when necessaryEnd of the drying process Take out the laundry Empty the condensate container Clean the condenser Clean the fluff filter Program tables Care symbols R, Q fill-in quantity up to 5kg Cool AIR Program Small glossary of textile information Care symbols Cleaning the condenser Cleaning and maintenance Cleaning the panel and operating parts Cleaning the filter areaClean the drum Problem Possible cause Remedy Troubleshooting OFF Replace the filament bulb Changing-over the door stop Changing-over the door stop Information for the electrician Technical dataPower supply Kits Washing/drying column Special accessoriesKit for external condensate drain-off Use condensate Viscose Page When do you incur costs even during the warranty period? Service