AEG 56609 operating instructions Replace the filament bulb

Troubleshooting

Replace the filament bulb

0Procure a special filament bulb for your Lavatherm through the customer service organisation (ET-No. 647072580).

1 Warning! Never use standard lamp bulbs in your Lavatherm! They produce too much heat, causing overheating under the lamp covering hood and possible damage.

0Disconnect the mains plug. With fixed connection: Screw-out the fuse or switch-off the circuit breaker.

0Screw-off the covering hood of the filament bulb. (The filament bulb is located at the top behind the fill-in door; see Front view).

0Replace the defective filament bulb.

0Screw-on the covering hood over the filament bulb again.

1 Warning! For safety reasons the covering hood must be screwed-on. Otherwise the dryer must not be operated.

28