Installation and connection | AEG 56609 specification

Safety instructions

Installation and connection

•First take-off the base shroud before carrying the dryer!

•Check the dryer for Transportation damage. Never connect-up a damaged appliance! Contact your supplier if the appliance is damaged.

•Do not set-up the dryer in frost-endangered rooms!

•Set-up the dryer horizontal!

•Do not place the dryer on high-pile carpet floors!

This would hinder air circulation at the ventilation slots!

•If the dryer is placed adjacent to a gas, coal or electric cooking stove, interpose a thermally insulating non-combustible plate between the dryer and the stove (dimensions: 85x57,5cm).

•The electric power plug connector of the appliance must remain accessible even after erection.

•The technical conditions of the electric power supply company for making fixed connections of electrical appliances to the mains require that such connections may only be made by an authorised electrician.

7

Image 7

AEG 56609 operating instructions Installation and connection

Contents

Lavatherm 56609 Exclusiv Please read these operating instructions through carefully Dear customer Content Content General safety 1Safety instructions Utilisation in accordance with the intended purpose Safety of children Installation and connection General information Dispose of the packaging material Disposal Pre-drying Drying process Environmental protection tips Fill weight Duration Power Drying program Front view Construction of the appliance Operator control mask Program selector Before the first drying process Brief operating instructions Fill-in the laundry DryingPreparing the laundry Open the fill-in door Start the drying program Take out the laundry Take-out laundry or put-in laundry when necessarySwitch-off the dryer End of the drying process Empty the condensate container Clean the condenser Clean the fluff filter Program tables Care symbols R, Q fill-in quantity up to 5kg Cool AIR Program Small glossary of textile information Care symbols Cleaning the condenser Cleaning and maintenance Clean the drum Cleaning the filter areaCleaning the panel and operating parts Problem Possible cause Remedy Troubleshooting OFF Replace the filament bulb Changing-over the door stop Changing-over the door stop Power supply Technical dataInformation for the electrician Kit for external condensate drain-off Special accessoriesKits Washing/drying column Use condensate Viscose Page When do you incur costs even during the warranty period? Service