AEG 56609 operating instructions Troubleshooting, Problem, Possible cause, Remedy

Troubleshooting

Troubleshooting

In the event of a malfunction try to solve the problem yourself using the information below. If you call out the customer service to solve one of the problems listed here or due to incorrect operation, a charge will be made for the visit of the service engineer even during the warranty period.

Problem	Possible cause	Remedy
	Electric mains plug not	Connect the mains plug
	connected
	X STARTbutton not	Press the X START
	pressed	button
	No program set	Set a program
The dryer is not working	Fill-in door open	Close the fill-in door
	Fuse blown or automatic	Check the fuse or
		automatic circuit breaker.
	circuit breaker in the
		Get an electrician to repair
	fusebox (house electrical
		any faults in the house
	installation) defective
		electrical installation.
		Set a different (time)
	Wrong program selected	program for the next
		drying process
	Fluff filter clogged	Clean the fluff filter
	Heat exchanger covered	Cleaning the heat
	with fluff	exchanger
	Incorrect amount of	Keep to the
The drying result is		recommended amount of
	laundry filled-in
unsatisfactory		laundry to be filled-in
	Laundry drained insuffi-	Drain the laundry
	ciently before drying	adequately
	Ventilation slits in the	Clear the ventilation slits
	base region covered-up	in the base region
	Deposit on the inside	Clean the inside surface
	surface of the drum or on	of the drum and the
	the drum ribs	drum ribs

26