Run wash cycle, Brief instructions | AEG 62600 specs

Run wash cycle

Brief instructions

A washing cycle consists of the following steps:

0Open the door, put in the washing.

0Shut the door.

0Add detergent/conditioner.

0Set the correct washing program:

–Set the program on the program selector;

–Set the temperature on the temperature selector;

–Select type of washing with the type of washing buttons.

0 Press

(ON/OFF) button.

Washing program starts automatically after six seconds. During these six seconds:

0Set any delay timer if required.

0If applicable change final spin speed/select a (Rinse hold). You can change this setting and the temperature during the entire washing cycle.

After the washing program has finished:

Attention! If the washing cycle ends with a (Rinse hold),

run (PUMP OUT) or (SPIN) before opening the door.

0Open the door, remove the washing.

0 Press the

(ON/OFF)button!

18

Image 18

AEG 62600 operating instructions Run wash cycle, Brief instructions, Washing cycle consists of the following steps

Contents

ÖKO-LAVAMAT Dear customer Please read these operating instructions through carefully Contents Contents Safety instructions General safetyInstallation, connection and initial operation Safety of children Intended use Dispose of the packaging DisposalEnvironmental tips Dispose of your old washing machine Most important features of your appliance All-round water protection Structure of the appliance Front view Control panel Program selectorPrewash Temperature selector Program selector as program progress display Final spin speed/ Rinse Hold button Delay Timer buttonType of washing buttons ON/OFF button Compartment for washing powder and fabric softener Program Before using your machine for the first timeConsumption values and time required for selected programs Load Preparing the washing cycle Sorting out and preparing washing Washing Types and Care Symbols How much washing powder and fabric softener? Using a water softenerSpecifications of water hardness Liquid detergent Washing cycle consists of the following steps Run wash cycleBrief instructions After the washing program has finished Filling in the washing Adding washing powder/fabric softener PRE Wash Setting the washing program Set temperatureSet washing program Check if the tap is open Switch on the washing machine press During the washing program Washing cycle finished/Removing the washingTo stop the washing program prematurely Washing Care SymbolProgram tables Max. Load Program Selector 10-litre bucket contains about 2.5kg of dry washing cotton Separate Soaking TypeWashing Separate Rinsing Type of Washing Cleaning and caring Daily useDetergent compartment Precautionary measures in the event of a risk of frost Washing machine drumDoor Troubleshooting RemedyMalfunction Possible cause Remedy Feet are not correctly set Tion instruction Malfunction Possible cause If after the final rinse foam is still visible If the washing results are not satisfactoryIf there are still grey stains on the washing If there are white residues on the washing Executing an emergency emptying Cleaning the suds pump When the suds have drained out completely Position 1 Water Cooling Making the AdjustmentAdditional Rinse/Water Cooling Position 2 Water Cooling and Additional Rinse Information for the electrician Technical dataPower supply This appliance complies with the following EC directives Index Abort the program Conditioners Service When do you incur costs even during the warranty period?