AEG 62600 operating instructions Malfunction Possible cause

Troubleshooting

Malfunction		Possible cause	Remedy
		Drain hose is kinked.	Eliminate the kink.
		Maximum pumping height	Please contact the customer
		(drain height 1m from the	service, it has a retro-kit
Washing has not been		position of the machine) is	available for pump heights
		exceeded.	above 1m.
spun well, there is
			Switch off the machine and
water left in the drum.
		Suds pump is blocked.	pull the plug out of the
			socket, clean the suds pump.
		If a siphon is connected: the	Clean the siphon.
		siphon is blocked.
		Program is not yet finished,
The door cannot be		(ON/OFF) display lamp	Wait until the	(ON/OFF)
opened.
			lamp goes out.
		lights up.
		Probably caused by a wash-	This does not negatively
The rinse water is			affect the rinse results. If
		ing powder with a high sili-
cloudy.			necessary use liquid deter-
		cate content.
			gent.
		Tap is not fully open.	Open tap fully.
		The sieve in the threaded fit-
Remnants of detergent		ting on the water inlet hose	Clean sieve.
are building up in the		at the tap is blocked.
detergent drawer.
		Sieve on threaded fitting for
		the water inlet hose on the	Clean sieve.
		machine is blocked.
Program selector skips		(PRE WASH)	(PRE WASH) can-
(PRE WASH).		combined with	not be combined with
		(WOOLLENS).	(WOOLLENS).
Program selector stops		(SOAKING)	(SOAKING) cannot
at	(SOAKING).	combined with	be combined with
		(WOOLLENS).	(WOOLLENS).
Stain remover is not		(STAIN)	(STAIN) cannot
		combined with	be combined with
washed in.
		(WOOLLENS).	(WOOLLENS).

32