AEG 62600 specification

Run wash cycle

Start the washing program, set delay timer and the final spin speed.

0Check if the tap is open.

0 Switch on the washing machine: press the

(ON/OFF) button.

–The washing program starts automatically after six seconds.

–During these six seconds you can set any delay timer if required to delay the start of the washing program.

–As soon as the door is locked the On/Off display lamp lights up (max. 15 seconds after the start).

3 For the programs (STAIN), (MAIN WASH) and

(QUICK WASH) immediately after the program has started the program selector moves to a position directly behind (QUICK WASH). Then it displays the program progress as usual.

If applicable set the delay timer (delay of the start of the

program): press the delay timer button so often until the time delay desired is displayed.

– The remaining time until the start of the programm is dis- played (in steps of 12, 8, 4, 2 hours).

– While the delay timer expires you can open the door to add washing.

–Changing or cancelling the delay timer: press the delay timer button so often until the display lamp of the desired time delay lights up. If no display lamp lights up, the delay timer is cancelled, the program will start imme- diately.

0If applicable change the spin speed for the final spin or

select Rinse hold:

Press the final spin speed/ (Rinse hold) button so often until the display of the spin speed required lights up (or of Rinse Hold).

With (Rinse hold) the washing stays in the final rinse water, it is not spun.

22

Image 22

AEG 62600 operating instructions Check if the tap is open Switch on the washing machine press

Contents

ÖKO-LAVAMAT Dear customer Please read these operating instructions through carefully Contents Contents General safety Safety instructionsInstallation, connection and initial operation Safety of children Intended use Dispose of the packaging DisposalEnvironmental tips Dispose of your old washing machine Most important features of your appliance All-round water protection Structure of the appliance Front view Program selector Control panelPrewash Temperature selector Program selector as program progress display Final spin speed/ Rinse Hold button Delay Timer buttonType of washing buttons ON/OFF button Compartment for washing powder and fabric softener Program Before using your machine for the first timeConsumption values and time required for selected programs Load Preparing the washing cycle Sorting out and preparing washing Washing Types and Care Symbols How much washing powder and fabric softener? Using a water softenerSpecifications of water hardness Liquid detergent Washing cycle consists of the following steps Run wash cycleBrief instructions After the washing program has finished Filling in the washing Adding washing powder/fabric softener PRE Wash Set temperature Setting the washing programSet washing program Check if the tap is open Switch on the washing machine press Washing cycle finished/Removing the washing During the washing programTo stop the washing program prematurely Washing Care SymbolProgram tables Max. Load Program Selector 10-litre bucket contains about 2.5kg of dry washing cotton Type Separate SoakingWashing Separate Rinsing Type of Washing Daily use Cleaning and caringDetergent compartment Washing machine drum Precautionary measures in the event of a risk of frostDoor Remedy TroubleshootingMalfunction Possible cause Remedy Feet are not correctly set Tion instruction Malfunction Possible cause If after the final rinse foam is still visible If the washing results are not satisfactoryIf there are still grey stains on the washing If there are white residues on the washing Executing an emergency emptying Cleaning the suds pump When the suds have drained out completely Position 1 Water Cooling Making the AdjustmentAdditional Rinse/Water Cooling Position 2 Water Cooling and Additional Rinse Information for the electrician Technical dataPower supply This appliance complies with the following EC directives Index Abort the program Conditioners Service When do you incur costs even during the warranty period?