818 35 69-02/2 9
Installation
The position of the freezer part and the fridge part in the combination
fridge-freezer can be decided by the customer. However the final
assembly of the appliance or a later change in the position of the
freezer and fridge must be carried out by your local Service Force
Centre.

Installation Location

The appliance should be installed in a well ventilated, dry room.
Energy use is affected by the ambient temperature.
The appliance should therefore
– not be exposed to direct sunlight;
– not be installed next to radiators, cookers or other sources of heat;
– only be installed at a location whose ambient temperature
corresponds to the climate classification, for which the appliance is
designed.
The climate classification can be found on the rating plate, which is
located at the left on the inside of the appliance.
The following table shows which ambient temperature is correct for
each climate classification:

Appliance Alignment

0 1. The appliance must be level, please compensate for unevenness in the
floor by turning the two adjustable feet at the front.
Climate classification for an ambient temperature of
SN +10 to +32 °C
N+16 to +32 °C
ST +18 to +38 °C
T+18 to +43 °C