Operating instructions
Performing A Washing Cycle
Brief Instructions
A washing cycle is performed in the following steps:
0 1. Set the correct washing program:
–select the program and the temperature with the program selector
–select additional program(s) if required
2.If required, change the spin speed/select RINSE HOLD.
3.Set the ] (DELAY TIMER) if necessary.
4.Open the door, load the washing.
5.Close the door.
6.Add detergent/conditioner.
7.Start the washing program.
At the end of the washing program:
Important! If the washing cycle ends with a rinse hold, perform either C (PUMP OUT), D (SPIN) or F (SHORT SPIN) before opening the door.
8.Open the door, remove the washing.
9.Switch off the washing machine: set the program selector to I (OFF).
17
