Operating instructions

What to do when…

3

The somewhat different, in comparison to older wash-

 

ing machines, whistling noise during spinning is due to

the modern drive system.

A rattling sound on startup – in particular when using for the first time – is caused by the circulation pump and is due to the design.

Trouble Shooting

In the event of a malfunction, try to eliminate the problem yourself with the help of the instructions listed here. If you request customer service assistance for one of the malfunctions listed here, or for an operator error, a charge will be billed for the customer service techni- cian’s visit, even during the guarantee period.

If error code (1, (2 or (d appears at the multi-display, you may be able to eliminate the error yourself (see the following table of malfunctions).

After the error has been eliminated, press the O/s (START/PAUSE) button. If the error code is again displayed, contact customer service.

Please contact customer service for all other error displays and inform them of the error code.

Malfunction

Possible Cause

Remedy

 

Mains plug is not plugged in.

Insert mains plug.

 

House fuse in defective.

Replace fuse.

Washing machine does

Door is not closed properly.

Close door; lock must engage

not work.

audibly.

 

 

O/s(START/PAUSE) button

Press O/s (START/PAUSE)

 

button until the program

 

not pressed for long enough.

 

starts.

 

 

The machine does not

Tap is closed.

Open tap.

take in water.

Sieve in the threaded fitting

Unscrew the hose from the

Fault code (1 is dis-

on the water inlet hose is

tap, remove the sieve and

played.

blocked.

clean under running water

 

 

 

28

Page 28
Image 28
AEG 72620 manual What to do when…, Trouble Shooting, Malfunction Possible Cause Remedy