Operating instructions

Starting the Washing Program

0 1. Check whether the water tap is open.

2.Start the washing program: press the O/s (START/

PAUSE) button.

The washing program is started, or starts at the end of the time delay set.

3

If the K (DOOR) indicator flashes red when the O/s (START/PAUSE)

 

button is pressed, the door is not properly closed. Close the door firmly

and press the O/s (START/PAUSE) button again.

If the delay timer has been set:

The start time delay set on the delay timer counts down; the time remaining until the program starts is displayed on the multi-display (in whole hours remaining). During this time you can add washing, change or stop the delay timer.

• Adding washing: press the O/s (START/PAUSE) button, the door can be opened. Then close the door and press the O/s (START/ PAUSE) button again.

• Changing or stopping delay timer: press the b (DELAY TIMER) button repeatedly until the desired time is displayed; when the program duration is displayed (display in minutes, e.g.119), the washing pro- gram starts without delay.

21

Page 21
Image 21
AEG 72620 manual Starting the Washing Program, If the delay timer has been set