AEG 72620 manual Water feed

Installation and Connection Instructions

Water feed

A flexible pressure tubing of 1.3m length is supplied.

If a longer feed tubing is needed, a complete VDE-approved tubing set with mounted screw connections, supplied by our customer service, should be used exclusively.

–For washing machines without Aqua-Control, tubing sets are available in lengths of 2.2m, 3.5m and 5m.

–For washing machines with Aqua-Control, tubing sets are available in lengths of 2.0m, 2.9m and 3.9m.

Attention! Under no circumstances may tubing be pieced together for the purpose of lengthening!

3	Sealing rings are either inserted in plastic nuts of the tubing screw con-
	nection or contained in an accompanying packet. Do not use other

seals.

0 1. Connect the angled hose connector to the machine.

Attention! Plastic nut at the tube coupling may only be hand tightened.

2.Connect the straight hose connector to a water tap

with an R 3/4 (inch) thread.

Attention! Only tighten the plastic nuts on the hose connectors by hand.

3. By opening the water tap slowly prior to the initial operation, check whether the connection is tight.

44