AEG 82730 3

Setting up and connection instructions

2. Firmly pull both hose holders off

the unit.

3 The special button E and the plug

caps D (2 ea.) and G (1 ea.) are

supplied with the unit.

3. Unscrew the two screws A using

the special button E.

4. Unscrew the four screws B using

the special button E.

5. Remove the transport rail C.

6. Screw the four screws B back in.

7. Close off the two large holes with

the plug caps D.

Attention! Push in the plug caps

so firmly that they engage in the

rear panel (this protects the inside

of the unit against splash water).

8. Remove the screw F, including the

compression spring with the spe-

cial button E.

9. Close off the hole with the plug

cap G.

Attention! Push in the plug cap

so firmly that it engages in the

rear panel (this protects the inside

of the unit against splash water).

Contents

Main Dear customer, 1 3 2 Contents Instructions for use Setting up and connection instructions . . . . . . . . . . . . . . . . . 44 Page Instructions for use 1 Safety Before Putting into Operation for the First Time Correct Use Child Safety General Safety 2 Disposal 2 Environment Tips Unit Description Front View Drawer for Washing Powder and Care Agent Control Panel Program Selector 2 3 Additional Program Buttons Consumption Values and Time Requirements Running Time Display 3 What Does Update Mean? Water Protection Aqua Control + Aqua Alarm Before the First Wash Prepare the Washing Cycle Sort and Prepare the Washing Washing Types and Care Codes Washing Detergents and Care Agents Which washing detergent and care agent? How much washing detergent and care agent? 2 Water Softener Run a Washing Cycle Brief Instructions Set the Washing Program 3 Change Spin Speed / Select Rinse Hold 3 Set the Delay Timer Opening and Closing the Filling Door 3 Add the Washing 3 Add Washing Detergent/Care Agent 3 Start the Washing Program 3 Completion of the Washing Program 3 Washing Cycle Ended/Remove Washing Page Program Tables Washing Page Separate Conditioning/Starching /Impregnating Separate Spin Cleaning and Care Control Panel Washing Detergent Drawer Washing Drum Filling Door Cleaning the drain pump 1 What to do if ... Remedying Faults Page Page Page If the washing result is not satisfactory Carry Out an Emergency Emptying Operation 1 Emergency Unlocking of the Filling Door 1 Additional Rinse (RINSE+) 3 Solution Cooling 3 Additional Rinse and Solution Cooling Program Saving 3 Child Safety Feature 1 Setting up and connection instructions Safety Instructions for Installation Setting Up the Unit 3 Transporting the Unit Remove the Transport Safeguard 3 Prepare the Installation Location Setting Up on a Concrete Pedestal Setting Up on a Vibrating floor Compensate for Floor Unevenness Electrical Connection ; Water Connection 3 Permissible Water Pressure 3 Water Drainag e Delivery Heads over 1m Technical Data Dimensions Customer services Customer services Belgium Index Service