Instructions for use
14

Running Time Display

3 The running times of the washing programs
depend on the usual washing practice and
the ambient conditions at the installation
location.
The washing type and quantity, the type of washing powder, the water
temperature and the room temperature etc. can influence the duration
of the washing program.
The washing machine saves from each program the running times of
the last wash cycles and calculates from them the average running time
for a washing cycle. This average running time is shown by the multi
display during the next wash.
After several washes, the running time shown in the multi display is
thereby adapted to the usual washing practice and the ambient
conditions at the installation location.
What Does ”Update” Mean?
The washing programs of your washing machine are controlled by soft-
ware.
New types of textiles or new washing powders/liquids could, in the fu-
ture, require new washing programs. The software can be adapted to
these in most cases.
For further information on the ”Update”, consult the Customer Service.
You can also ask the Customer Service about the costs of an ”Update”.
Water Protection Aqua Control + Aqua Alarm
In the event of damage to the supply hose, the system blocks the fur-
ther supply of water to the unit directly st the water tap.
If water escapes elsewhere, the drainage pump automatically pumps
off – even if the unit is switched off. The washing machine merely has
to be connected to the electricity mains. When the water protection
system responds, a warning signal sounds at the same time.