AEG 82730 3

Instructions for use

24

Completion of the Washing Program

Program Sequence Display

Before the start, the program steps to be carried out

are displayed by the program sequence display. The

current program step is displayed during the washing

program.

Multi-Display

The expected remaining time (in minutes) is

shown up to the program end in the multi-

display.

3 With automatic program adaptation by the controller of the washing

machine, (quantity of washing, type of washing, imbalance recognition,

special rinse etc.) it is possible to stop or correct the counting of the re-

maining run time.

Change the Spin Speed

During the washing program, the spin speed can still be changed or

RINSE HOLD (GEEN CENTR., SANS ESSOR.) can be set.

Other settings cannot be changed.

Abort Program

0 To abort the washing program early, turn the program selector to OFF

(UIT, ARRET).

3 The washing program can be interrupted at any time with the START/

PAUSE (START/PAUZE, MARCHE/PAUSE) button and can be continued

by pressing the button again.

Washing Cycle Ended/Remove Washing

After a washing program has ended, END (EINDE, FIN) lights up on the

program sequence display.

•A crease protection phase of approx. 30 minutes follows at the end of

the program if program EASY IRON (STRIJKVRIJ, SANS REPASSAGE)

had been selected. The multidisplay also shows the remaining time

and the display END (EINDE, FIN) is illuminated. You can open the fill-

ing door and take the washing out at any time during the crease pro-

tection phase..

•If you selected RINSE HOLD (GEEN CENTR., SANS ESSOR.), the indica-

tor next to the button START/PAUSE (START/PAUZE, MARCHE/

PAUSE) flashes.

Contents

Main Dear customer, 1 3 2 Contents Instructions for use Setting up and connection instructions . . . . . . . . . . . . . . . . . 44 Page Instructions for use 1 Safety Before Putting into Operation for the First Time Correct Use Child Safety General Safety 2 Disposal 2 Environment Tips Unit Description Front View Drawer for Washing Powder and Care Agent Control Panel Program Selector 2 3 Additional Program Buttons Consumption Values and Time Requirements Running Time Display 3 What Does Update Mean? Water Protection Aqua Control + Aqua Alarm Before the First Wash Prepare the Washing Cycle Sort and Prepare the Washing Washing Types and Care Codes Washing Detergents and Care Agents Which washing detergent and care agent? How much washing detergent and care agent? 2 Water Softener Run a Washing Cycle Brief Instructions Set the Washing Program 3 Change Spin Speed / Select Rinse Hold 3 Set the Delay Timer Opening and Closing the Filling Door 3 Add the Washing 3 Add Washing Detergent/Care Agent 3 Start the Washing Program 3 Completion of the Washing Program 3 Washing Cycle Ended/Remove Washing Page Program Tables Washing Page Separate Conditioning/Starching /Impregnating Separate Spin Cleaning and Care Control Panel Washing Detergent Drawer Washing Drum Filling Door Cleaning the drain pump 1 What to do if ... Remedying Faults Page Page Page If the washing result is not satisfactory Carry Out an Emergency Emptying Operation 1 Emergency Unlocking of the Filling Door 1 Additional Rinse (RINSE+) 3 Solution Cooling 3 Additional Rinse and Solution Cooling Program Saving 3 Child Safety Feature 1 Setting up and connection instructions Safety Instructions for Installation Setting Up the Unit 3 Transporting the Unit Remove the Transport Safeguard 3 Prepare the Installation Location Setting Up on a Concrete Pedestal Setting Up on a Vibrating floor Compensate for Floor Unevenness Electrical Connection ; Water Connection 3 Permissible Water Pressure 3 Water Drainag e Delivery Heads over 1m Technical Data Dimensions Customer services Customer services Belgium Index Service