![](/images/new-backgrounds/1134981/13498183x1.webp)
Instructions for use
Program Saving
| To protect a program setting against unwanted changes (e. g. turning |
| the program selector, pressing auxiliary buttons etc.), you can set the |
| program saving function. This prevents damage to your washing. |
3 | Setting and cancelling the program saving function is possible at any |
| time during a program. |
Setting the Program Saving Function:
01. Set the required washing program.
2.To start the program, press the START/PAUSE (START/PAUZE, MARCHE/ PAUSE) button.
3.Simultaneously keep the PRE WASH (VOORWAS, PRELAV.) button and the SOAKING (INWEKEN, TREMPAGE) button pressed for 5 seconds. The program sequence display flashes for 5 seconds;
The program saving function is set.
3 | You cannot make any other settings as long as the program saving |
| function is set. The door cannot be opened with the DOOR/LIGHT |
| (DEUR/LICHT, PORTE/ECLAIR.) button. Even after the washing cycle has |
| ended, you must first cancel the program saving function before you |
| can open the door. |
| If an attempt is made during the washing cycle to change the selected |
| setting by pressing a button, the program sequence display flashes for |
| 5 seconds. |
| If an attempt is made to change the selected setting by turning the |
| program selector, the program sequence display flashes until the origi- |
| nal position of the program selector is restored. The washing cycle is |
| not influenced in either case. |
3 | The program selector must be in its original position before you can |
| cancel the program saving function. |
Canceling the Program Saving Function:
0Simultaneously keep the PRE WASH (VOORWAS, PRELAV.) button and the SOAKING (INWEKEN, TREMPAGE) button pressed for 5 seconds. The program sequence display flashes for 5 seconds, then it lights up con- stantly for 5 seconds. The program saving function is cancelled.
42