JVC S200BK manual To change the settings Parental Lock, Screen display appears, On the TV screen

Initial settings

To change the settings [PARENTAL LOCK]

You can change the Parental lock settings later.

4 To change the set level, use CURSOR 2/3 to

select the desired level while points [Set Level], and then press ENTER.

moves to [PASSWORD].

2-1, 5-1

1

OPEN	STANDBY/ON
/CLOSE
PLAY	3D
MODE	PHONIC CANCEL RETURN

1	2	3
4	5	6
7	8	9
10	0	+10
		THEATER
ANGLE	SUBTITLE AUDIO POSITION
DIGEST		ZOOM
PREVIO		NEXT
US
4		¢
CLEAR	SELECT	STROBE
	3
7		8
SLOW		SLOW+
	–
1		¡
TITLE		MENU
	5
5	ENTER	5
	∞
CHOICE		DISPLAY

1, 2-2, 3-2,

4-2, 5-2

3-1, 4-1

5 Enter the password using the numeric buttons (0 to 9) and press ENTER.

moves to [EXIT].

The password entered in the above step becomes the new password. If you do not change the password, enter the same password as in the step 2. Even if you want to change only the country/area code and/or set level, do not forget to enter the password after changing the country/area code and/or set level. Otherwise, the new country code and/or set level will not become effective. Pressing ENTER again returns to the opening display.

RM-SXVS40A REMOTE CONTROL

7 While a DVD VIDEO disc is stopped or no disc is inserted

1 Press ENTER while holding down 7 on the remote control unit.

The Parental Lock on-

screen display appears		PARENTAL LOCK
	Country Code		US
on the TV screen.
	Set Level		8
	PASSWORD		- - - -

points [PASSWORD].

EXIT

CURRENT PASSWORD? ••• PRESS 0~9 KEY

2 Enter your current 4-digit password using the

numeric buttons (0 to 9) and press ENTER.

moves to [Country Code] if you enter the correct password.

If you enter the wrong password, “WRONG! RETRY...” appears on the TV screen, and you cannot go to next step.

settings	2/3 to select the desired country code and
Initial	3 To change the country code, use CURSOR
	press ENTER.
	moves to [Set Level].

When you change the country code, you must select the parental level.

NOTES

•When you enter the wrong password more than 3 times

in step 2 above, moves to [EXIT] automatically and CURSOR 5/∞ does not work.

•If you forget your password in step 2 Enter “8888.”

44