AEG F89078VI-M user manual Levelling the appliance, Installation Instructions

INSTALLATION INSTRUCTIONS EN

5.1.2 Levelling the appliance

Level the appliance using the relative adjustable feet (e.g.: ref. A fig. 5-02); use an open-ended wrench to rotate the feet until the dishwasher is perfectly level. Some models are fitted with just one rear foot which can be adjusted with a screw located at the bottom front of the appliance (ref. A fig. 5-03); use a suitable Phillips screwdriver to turn the screw until the dishwasher is perfectly level.

Use a spirit level to check the appliance is perfectly level (ref. B fig. 5-02). Leveling is vital for assuring correct dishwasher operation.

Make sure to leave a gap of at least 3 mm (7/64”) between the top of the dish- washer and the worktop (ref. C fig. 5-02).

Fig. 5-02

Rev 0.0 15