AEG F89078VI-M Installation Instructions, Connecting to a “T” union of the drain circuit

INSTALLATION INSTRUCTIONS EN

Connecting to a “T” union of the drain circuit

MAKE THE CONNECTION UPLINE FROM THE SIPHON OF THE DRAIN LINE AND AT LEAST 400 mm (15-3/4”) ABOVE THE FLOOR ON WHICH THE DISHWASHER WILL BE INSTALLED.

1.Connect the dishwasher drain hose (ref. A fig. 5-11) to the “T” union (ref. B fig. 5-11) of the drain circuit using a 38 to 50 mm (1-1/2 to 2”) screw clamp* (ref. C fig. 5-11); if necessary, cut the end of the dishwasher drain hose (ref. D fig. 5-11)

(do not cut the corrugated section).

* Available from any plumbing stockist

B
C	D
A
	Fig. 5-11

Rev 0.0 21