Daily use 11
When these buttons are pressed, the corresponding pilot lights come on. When they are pressed again, the pilot lights go out.
If an incorrect option is selected, the in yellow pilot light of the button 8 blinks for 3 times and the Err message appears on the display for some seconds.
For the compatibility among the washing programmes and the options see chapter «Wash- ing Programmes».
Select the STAIN option (Button 4)
Select this option to treat heavily soiled or stained laundry with stain remover (extended main wash with time optimised stain action phase). The relevant light will light up.
This option is not available with a temperature lower than 40°C.
If you wish to perform a programme with the stain option, pour stain remover into com- partment 
.
Select the SENSITIVE option (Button 5)
By selecting this option the washing intensity will be reduced. The machine adds one rinse in the programmes for cottons and synthetics.
This option is recommended for non fast coloured items and for frequently washed items.
Select the TIME SAVING option (Button 6)
This option allows you to modify the washing time, automatically proposed by the appli- ance.
By pressing this button you can select the following options:
DAILY: by pressing button 6 once, the relative pilot light comes on and the washing duration will be reduced to wash daily soiled laundry.
SUPER QUICK: by pressing button 6 twice, the relative pilot light remains lit, the washing duration will be reduced to wash lightly soiled laundry or items that have been used or worn for a short time. On the display will be visualized the decreased washing time.
Select the START/PAUSE (Button 8)
To start the selected programme, press the button 8 , the corresponding red pilot light stops blinking.
The pilot light 10.1 is on to indicate that the appliance starts operating. The pilot light 10.2 is on to indicate the door is locked.
To interrupt a programme which is running, press the button 8 : the corresponding red pilot light starts blinking.
To restart the programme from the point at which it was interrupted, press the button 8 again. If you have chosen a delayed start with button 9 , the machine will begin the count- down. If an incorrect option is selected, the yellow pilot light of the button 8 blinks for 3 times the message Err is displayed for about 2 seconds.
Select the DELAY START (Button 9)
Before you start the programme , if you wish to delay the start, press the button re- peatedly, to select the desired delay.
The selected delay time value (up to 20 hours) will appear on the display for about 3 seconds, then the duration of the programme will appear again.
