10Daily use
Select the required programme by means of programme selector dial (1)
You can choose the right programme for any type of laundry following the descriptions on the washing programme tables (see «Washing Programmes»).
Turn the programme selector dial to the required programme. The programme selector determines the type of washing cycle (e.g. water level, drum movement, number of rinses) and the washing temperature according to the type of laundry.
The pilot light of button 8 starts blinking.
The selector dial can be turned either clockwise or anticlockwise. Position 
to Reset programme/ Switching OFF of the machine.
At the end of the programme the selector dial must be turned to position 
, to switch the machine off.
If you turn the programme selector dial to another programme when the machine is work- ing, the yellow pilot light of button 8 will blink 3 times and the message Err is displayed on the display to indicate a wrong selection. The machine will not perform the new selected programme.
Select the desired TEMPERATURE (Button 2)
When selecting a programme, the appliance automatically proposes the default tempera- ture provided for that programme.
Press this button repeatedly to increase or decrease the temperature, if you want your laundry to be washed at a temperature different from the one proposed by the washing machine.
By selecting position 
(Cold) the machine will wash with cold water. To be used for extremely delicate items, such as curtains.
For the maximum and the minimum available wash water temperature, see «Washing pro- grammes».
Select the SPIN speed or the RINSE HOLD option (Button 3)
When the required programme has been selected, your appliance automatically proposes the maximum spin speed provided for that programme.
Press the button 3 repeatedly to change the spin speed, if you want your laundry to be spun at a speed different from the one proposed by the washing machine.
The relevant light will light up.
RINSE HOLD : by selecting this option the water of the last rinse is not emptied out to prevent the fabrics from creasing. When the programme has finished the display shows a blinking 
, the pilot light 10.2 goes on, the pilot light of button 8 is off and the door is blocked to indicate that the water must be emptied out.
To empty the water out please read chapter «At the end of the programme».
Programme option buttons
Depending on the programme, different functions can be combined. These must be selected after choosing the desired programme and before pressing the button 8 .
