ENGLISH
Continued
■When selecting DVD as an input source
Make preparations for timer play.
①Load a DVD Video or a CD.
②In case of a DVD Video, start playback.
■Notes :
•Timer function cannot play back MP3, WMA, JPEG disc or USB mass storage device.
•In case of DVD Videos, you should play back a DVD Video until the desired scene is reached to. If not, it will not play back a DVD Video.
•When a disc is not loaded, the timer function will automatically tune in the preset station.
8. (In case of DVD Video, at the scene to be played back,) turn the power off before on time.
• To operate the timer, you should turn the power off before
• At on time, the power is turned on and the timer function is performed automatically.
Checking the timer settings while displaying operation status
Press the TIMER button.
• Then the timer settings are displayed in order and the current status is displayed.
• In the standby mode, you can check the timer settings or select the desired timer mode, too.
• You can select the desired timer mode with pressing this button repeatedly.
ADJUSTING THE BRIGHTNESS OF THE DISPLAY
• Each time the DIMMER button is pressed, the brightness of the display changes as follows :
On ↔ dim
OPERATING THE SLEEP TIMER
•The sleep timer allows the system to continue to operate for a specified period of time before automatically shutting off.
•To set the receiver to automatically turn off after the specified period of time.
• Each time this button is pressed, the sleep time changes as follows:
→ 10 → 20 → 30 → 60 → 90 → OFF
Unit : minutes
• When the sleep time is selected, the display of the unit is dimly lit.
52
