Basic Operation
■Before operation
•Before operating this unit with the supplied remote control, refer to "UNIVERSAL REMOTE CONTROLS" on page 12 for details about operation.
LISTENING TO A PROGRAM SOURCE
1. Turn the power on.
•Each time the POWER ON/STANDBY button is pressed, the unit is turned on to enter the operating mode(the POWER ON/STANDBY indicator lights up blue) or off to enter the standby mode(the POWER ON/ STANDBY indicator lights up amber).
•On the remote control, press the POWER ON button to enter the operating mode or press the STANDBY button to enter the standby mode.
•In the standby mode, if the SOURCE SELECT,
PLAY/PAUSE (▶/ ■■ ) or OPEN/CLOSE(▲■ ) button is pressed, the unit can be also turned on.
■Standby mode
This means that the unit is not disconnected from the AC mains and a small amount of current is retained to support the operation readiness.
■Setting the power off mode
You can set the power off mode to either the standby mode or the power saving mode and can save energy more in the power saving mode than in the standby mode.
•Depending on whether the STANDBY button on the remote control for more than 2 seconds either in the standby mode or in the power saving mode, it is set to the power saving mode(time display is turned off) or the standby mode.
■Note
•Depending on the power off mode setting, when the power is turned off, it enters the mode you set.
2. Select the desired input source.
3. Turn on the source component for playback.
•In case of connecting the active subwoofer, turn on the active subwoofer.
4. Operate the selected component for playback.
5. Adjust the(overall) volume to a comfortable listening level.
6. To mute the sound.
•"MUTING" flickers.
•To resume the pervious sound level, press the MUTING button again.
7. To listen with the headphones.
ENGLISH
• Each time the SOURCE SELECT button on the front | • Then the sound from the speakers is cut off. | ||
| panel, the input source changes as follows : | ||
| → FM → AM → AUX → F. AUX → VIDEO → DVD |
| ■Note |
|
| ||
| (frequency display) | Be careful not to set the volume too high when using | |
|
|
| headphones. |
|
|
| |
15
