SETTING THE CLOCK
•In case of setting the clock for the first time, perform the setting procedure from the step 2.
•In the standby mode, you can set the clock, too. In this case, perform it from the step 2.
■Note :
•If the electricity fails or the AC input cord is unplugged, the current time will be cleared. Should this happen, set the clock again, performing it from the step 2.
1. To check the time, press the CLOCK/SLEEP button for more than 2 seconds.
• Then the time is displayed for several seconds and the current operation status is displayed.
• In the power saving mode, when the CLOCK/SLEEP button is pressed, the time is displayed for several seconds.
• Before the time display disappears, perform the step 2.
2. Press the CLOCK/SLEEP button for more than 2 seconds.
Example ) When setting to 6:30 PM.
• Then the hour digit is flickering for several seconds.
3. Press the CURSOR UP/DOWN (▲/▼) buttons to set the hour and press the ENTER button.
ENGLISH
• Then the minute digit is flickering for several seconds.
4. Press the CURSOR UP/DOWN (▲/▼) buttons to set the minute and press the ENTER button.
• Then the time is displayed for several seconds.
5. Press the ENTER button to select the desired time display mode.
• Each time the ENTER button is pressed, the 12 hour display mode or the 24 hour display mode is selected.
49
