ENGLISH
Operation of Tuner
LISTENING TO RADIO BROADCASTS
■Note :
•When selecting the FM, if FM stereo broadcasts are poor because of weak broadcast signals, you can set the FM mode to FM MONO to reduce the noise. (For details, refer to "Adjusting the channel level(/setting the FM mode)" on page 16.)
Auto tuning
1. Select the tuner.
2. Select the desired band.
• Each time the FM/AM button on the remote control is pressed, the band changes as follows :
"F" (FM) ↔ "A" (AM)
3. Press the TUNING UP/DOWN(∧/∨) buttons for more than 0.5 second.
• The tuner will now search until a station of sufficient strength has been found. The display shows the tuned frequency and "TUNED" indicator lights up.
• If the station found is not the desired one, simply repeat this operation.
• Weak stations are skipped during auto tuning.
Manual tuning
• Manual tuning is useful when you already know the frequency of the desired station.
After selecting the tuner and the desired band, press the TUNING UP/DOWN (∧/∨) buttons repeatedly until the right frequency has been reached.
46