Hollywood VR-652 When selecting the SCAN TYPE, Continued, To return to the main setup menu screen

VR-652(A) 2008.3.6 5:32 PM 페이지 39

Continued

When selecting the SCAN TYPE

•You can select the resolution of video signals to be output from the COMPONENT MONITOR OUTs depending on the TV connected to this unit. (For details on the resolution compatible with your TV, refer to the operating instructions of that.)

■Notes:

•When you set the SCAN TYPE to the mode other than INTERLACED, the S-VIDEO and the (composite) VIDEO MONITOR OUTs of this unit cannot output the video signal, meaning the picture will not be shown.

•If the resolution of the video signals which are output from the COMPONENT MONITOR OUTs and your TV are not matched, the picture is not clear, natural or displayed. In this case, change the setting of the resolution to suit that of your TV.

•Even though the SCAN TYPE is set to 720P or 1080I, if playing a DVD Video which is copy-protected by Macrovision, the SCAN TYPE is automatically set to INTERLACED and picture may be not shown correctly. In this case, you should connect the (composite) VIDEO IN or the S-VIDEO IN of your TV to this unit.

• INTERLACED : When outputting 720x480i (NTSC) (or 720x576i(PAL) (interlaced)) video signals from the COMPONENT MONITOR OUTs.

• 480P(576P) : When outputting 720x480p (NTSC) (or 720x576p (PAL) (progressive)) video signals.

•720P : When outputting 1280x720p (progressive) video signals.

•1080I : When outputting 1920x1080i (interlaced) video signals.

2.Press the CURSOR ▶ button to select the setting menu.

•Each time the CURSOR ▶ or ◀ button is pressed, the setting menu or the item menu is selected.

3.Press the CURSOR ▲/▼ buttons to select the preferred setting, then press the ENTER button.

• The selected setting is colored.

4. Press the CURSOR ◀ button to select the item menu.

5. Set other setups to your preference.

■To return to the main setup menu screen

•Press the CURSOR ◀ button to select the item menu, press the CURSOR ▲/▼ buttons to select "MAIN PAGE" and press the ENTER button.

Then the main setup menu screen will be displayed.

•When the RETURN button is pressed, the main setup menu screen will be displayed, too.

ENGLISH

39