Continued
2. Press the CURSOR ▲/▼ buttons to select the desired file, then press the DISPLAY button to enter the program mode.
ENGLISH
• Then the program menu is displayed.
• Each time the DISPLAY button is pressed, the program mode is canceled or the program menu is displayed.
3. Press the CURSOR ▲/▼ buttons to select ADD TO PLT, then press the ENTER button.
• Then the selected file is programmed.
■When selecting PROPERTIES in the program menu.
•Then the information on the selected file such as file size, recording conditions, etc. is displayed.
•To turn off the information, press the ENTER button.
■When selecting CANCEL
• Then the program mode is canceled.
4. Repeat the above steps 1~ 3 until the desired files are programmed.
5. Press the PROGRAM button to display PROGRAM LIST, then press the ENTER button or the PLAY/PAUSE (▶/■ ■) button.
•Then the files are played back in the programmed order.
•After all the programmed files have been played back, it enters the stop mode and the PROGRAM LIST is still displayed.
•Each time the PROGRAM button is pressed, the PROGRAM LIST is displayed or not.
In this case, even when the PROGRAM LIST disappears, the programmed files are not cleared.
31
