![](/images/new-backgrounds/1285496/28549697x1.webp)
Other Features
Setting the Sleep timer
The sleep timer enables the system to switch to standby mode automatically at a preset time.
A Press and hold DIM on the remote control until “SLEEP XX” appear on the display panel (XX = 15, 30, 45, 60 or
OFF.)
B To select the next sleep timer value, press DIM button again while in sleep timer mode until it reaches the desired preset
‘SLEEP’ will be showed on the display panel, except if “OFF” is selected.
Before the system switches to the standby mode, a countdown of 10 seconds is displayed.
“SLEEP10” “SLEEP 9”....
“SLEEP1” “SLEEP”
To cancel the sleep timer
Press and hold DIM until “OFF” appears or press the STANDBY2 button.
Dimming system’s display screen
In any active mode, press DIM on the remote control to select the desired brightness :
DIM 1 : 70% brightness
DIM 2 : 50% brightness
DIM 3 : 25% brightness
DIM OFF : normal brightness
Using the remote to operate your ‘Philips’ television
STANDBY
4
ON
1
2
3
A Press SOURCE button until “TV” appears on the display panel.
B Press . / > or use the numeric keypad
C Press TV VOL +/- to adjust the TV’s volume level.
D Press and hold STANDBY2 to turn off your TV.
English
49