Something not working?

 

 

 

 

 

 

 

 

 

 

 

 

 

Problem

 

Possible cause

Solution

 

 

 

 

 

 

 

 

 

The transit bolts have

Check that the machine

 

 

 

not been removed.

has been unpacked as

 

 

 

 

described in the Installation

 

The machine vibrates or is

 

 

section.

 

 

 

 

 

 

noisy

 

The feet have not been

Carefully level the machine.

 

 

 

adjusted.

 

 

 

 

 

There is little laundry in

Correct operation of the

 

 

 

the drum.

machine is not affected.

 

 

 

 

 

 

 

 

 

The programme is still

Wait until the end of the

 

 

 

 

running.

programme before opening

 

 

 

 

 

the door.

 

 

 

 

The water level is above the

Before opening the door,

 

 

The door will not open

 

bottom edge of the door.

the water must be emptied

 

 

 

 

 

out.

 

 

 

 

The machine is heating the

Wait until the end of the

 

 

 

 

water.

heating phase.

 

 

 

 

 

 

 

 

 

 

 

 

 

35

Page 35
Image 35
AEG L 14510 VI, L 12510 VI manual Noisy Feet have not been