AEG L 14510 VI, L 12510 VI manual Installation, Unpacking

Installation

Unpacking

All transit bolts and packing must be removed before using the appliance.

Using the supplied spanner, unscrew and remove the rear right-hand bolt and lay the machine on its back, taking care not to squash the hoses. This can be avoided by placing one of the corner packing pieces between the machine and the floor.

P025

Remove the polystyrene base and take off the bottom panel by unscrewing the central screw.

Carefully slide out the right poly- thene bag.

Repeat the opera- tion for the left and central poly- thene bags.

Re-fit the bottom panel using the 4 screws supplied with the door hinges (in the plas- tic bag) and the previously removed screw.

45