EXTRA RINSE BUTTON
7
Press button
7
to add rinsing phases
to a programme.
Use this function for persons allergic to
detergents and in areas where the wa-
ter is soft.
STAIN BUTTON
8
Press button
8
to add the stain phase
to a programme.
Use this function for laundry with hard
stains to remove.
When you set this function, put the
stain remover into compartment .
This function increases the pro-
gramme duration.
This function is not available
with a temperature lower than
40° C.
SPIN BUTTON
9
Press this button to:
• Decrease the m aximum speed of the
spin phase when you set a pro-
gramme.
The display shows only the spin
speeds available with the set
programme.
• Deactivate the spin phase.
• A ctivate the 'Rinse Hold' function.
Set this function to prevent fabric
creases. The appliance does not
drain the water when the programme
is completed.
Spin phase is off.
'Rinse Hold' function is
on.
TEMPERATURE BUTTON
10
Press button
10
to change the default
temperature.
- - = cold water
ACOUSTIC SIGNALSFUNCTION
You can hear the acoustic signals when:
• You activate the appliance.
• You deactivate the appliance.
• You press the buttons.
• Th e programme is completed.
• The appliance has a malfunction.
To deactivate/activate the acoustic
signals, press button
8
and button
7
at the same time for 6 seconds.
If you deactivate the acoustic
signals, they continue operate
only when you press the buttons
and when a malfunction occurs.
CHILD LOCK FUNCTION
This function prevents children to play
with the control panel.
• To activate the function, press button
10
and button
9
at the same time
until the display shows the symbol
.
• To deactivate the function, press but-
ton
10
and button
9
at the same
time until the symbol goes off.
You can activate the function:
• Before you press the Start/Pause but-
ton
4
: the appliance cannot start.
• After you press the Start/Pause but-
ton
4
, all the buttons and the pro-
gramme knob are deactivated.
PERMANENT EXTRA RINSEFUNCTION
With this function you can keep the ex-
tra rinse function permanently on when
you set a new programme.
• To activate the function press button
6
and button
5
at the same time
until the indicator of button
7
is on.
• To deactivate the function press but-
ton
6
and button
5
at the same
time until the indicator of button
7
is off.
ENGLISH 11