10
C• The display symbols.2)
Symbols Description
Washing phase
Rinse phases
Spin phase
Child lock
You cannot open the appliance door when the symbol is on.
You can open the door only when the symbol goes off.
If the programme is completed but the symbol stays on:
•There is water in the drum.
•The 'Rinse Hold' function is on.
Delay start
D• The programme time
When the programme starts, the time decreases with steps of 1 minute.
•The delay start
When you press the delay start button, the display shows the delay start time.
•Alarm codes
If the appliance has a malfunction, the display shows alarm codes. Refer to 'Troubleshooting' chapter.
•Err
The display shows this message for some seconds if:
–You set a function that is not applicable for the programme.
–You change the programme while it operates.
The indicator of the Start/Pause button 4 flashes.
•
When the programme is completed.
1)Only available for Spin/Drain programme.
2)The symbols appear on the display when the related phase or function is set.
START/PAUSE BUTTON | 4 |
| TIME SAVE BUTTON | 6 |
| |||||
Press button |
| to start or interrupt a | Press the button |
| to decrease the | |||||
4 | 6 | |||||||||
programme. |
|
|
|
| programme duration. |
| ||||
|
|
|
|
|
| • Press one time to set 'Shortened du- | ||||
DELAY START BUTTON | 5 |
| ration' for items with daily soil. | |||||||
Press button 5 to delay the start of a programme from 30 minutes to 20 hours.
•Press two times to set 'Extra Quick' for items with almost no soil.
Some programmes accept only one of the two functions.
