RECORDING USING AN EXTERNAL TIMERINPUT
Recording can be controlled by an external start/stop
signal input at the EXT TIMER IN terminal.
Example 3: To record using the signal input at the
EXT TIMER IN terminal, in 24-hour
mode.
œFollow the Before starting steps, under “NORMAL
RECORDING”.
NOTE:
œExternal timer input recording can only be set on the
9th line (EXT) of the (TIMER SET) menu.
1Press the MENU button until the (TIMER SET) menu
is displayed.
2Turn the JOG dial, until “EXT” (External) setting is
flashing.
ø
The “SPD” (recording speed) position will start
flashing.
3Turn the SHUTTLE ring to select the recording speed
mode (ex: 24), then turn the JOG dial clockwise.
ø
“N” will start flashing.
4Turn the SHUTTLE ring to select “Y”.
@@@@@@<TIMER@SET>
WEEK@START@@STOP@@@SPD
SUN@@--:--@@--:--@@---@N
MON@@--:--@@--:--@@---@N
TUE@@--:--@@--:--@@---@N
WED@@--:--@@--:--@@---@N
THU@@--:--@@--:--@@---@N
FRI@@--:--@@--:--@@---@N
SAT@@--:--@@--:--@@---@N
DLY@@--:--@@--:--@@---@N
EXT@@ööööö@@ööööö@@@24@Y
5Follow steps F and G under “PROGRAM TIMER
RECORDING on page 23”.
ø

When an external signal is input, “E” will light on

the digital display and recording will take place.

NOTES:
œOther timer recordings using the standard procedure
can also be programmed.
œThe external input signal must be input at the EXT
TIMER IN terminal.
RC4Q/U (TLS-9960 GB) Mon. Aug., 23/1999
English 27