Sanyo TLS-9960 SPECIAL PLAYBACK

SPECIAL PLAYBACK

Picture Search (Forward and Reverse)

1Turn the SHUTTLE ring clockwise (or

counterclockwise), during normal playback. See

“SHUTTLE Ring Operation”.

ø

The image can be seen while the tape is

advanced (or rewound) at high speed.

2To return to normal playback, release the SHUTTLE

ring.

NOTES:

œDuring picture search, noise (horizontal bars) will

appear in the picture.

œThe sound is muted.

Still Image

1Press the STILL/PAUSE button, during normal

playback.

ø

A still image can be viewed.

2To return to normal playback, press the PLAY button.

NOTES:

œIf still mode continues for 5 minutes or more, the VCR

will go into stop mode to avoid damaging the tape.

œIf the image is unstable (rolling vertically), adjust the

vertical lock control to correct.

Frame Advance

1Turn the JOG dial clockwise (or counterclockwise),

during still image mode.

ø

The still image is advanced (or rewound) of one

image (field).

ø

Turn the dial faster to increase the speed of the

frame advance.

2To return to normal playback, press the PLAY button.

NOTES:

œDuring reverse frame advance, noise will appear in the

picture.

œIf frame advance mode continues for 5 minutes or

more, the VCR will go into stop mode to avoid

damaging the tape.

Reverse Playback

1Turn the SHUTTLE ring counterclockwise and hold it,

during normal playback. See “SHUTTLE Ring

Operation”.

ø

Reverse playback will start.

2To return to normal playback, release the SHUTTLE

ring.

NOTES:

œDuring reverse playback, noise will appear in the

picture.

œIf operated from normal playback mode, reverse

playback is only possible during 2-hour playback speed

mode.

œThe sound is muted.

Slow motion (Forward and Reverse)

1Turn the SHUTTLE ring clockwise (or

counterclockwise) and hold it, during still image mode.

See “SHUTTLE Ring Operation”.

ø

Forward (or reverse) slow motion playback will

start.

2To return to normal playback, press the PLAY button.

NOTES:

œIf slow motion mode continues for 5 minutes or more,

the VCR will go into stop mode to avoid damaging the

tape.

œThe sound is muted.

RC4Q/U (TLS-9960 GB) Mon. Aug., 23/1999

32 English

Contents

Main PRECAUTIONS CAUTION CAUTION: For the customers in Canada Location FEATURES ACCESSORY 2 CONTENTS LOCATIONS OF CONTROLS AND INDICA TORS LOCATIONS OF CONTROLS AND INDICATORS Digital Display 4 6789F 1 Operation Indicators Page CONNECTIONS NOTE: 6 Power Cord Installation 1 TYPES OF ON-SCREEN DISPLAYS AND DISPLAY SEQUENCE Reference pages are shown in square brackets. English 7 RC4Q/U (TLS-9960 GB) Mon. Aug., 23/1999 TYPES OF ON-SCREEN DISPLAYS AND DISPLAY SEQUENCE Using the JOG dial and SHUTTLE ring 8 JOG dial SHUTTLE ring SETTING THE LANGUAGE AND CLOCK Language Setting 1 2 3 4 Clock setting CHANGING THE ON-SCREEN DISPLAY Selecting the On-screen Display 10 1 2 3 VIDEO CASSETTE TAPES Handling Cassette Tapes To Protect your Recordings Precautions concerning the video cassette tapes Loading VIDEO CASSETTE TAPES Correct tape thread check function 12 2 Setting the Action to Take When a Cassette is Loaded TAPE MANAGEMENT FUNCTION Operation If no tape management data is present on the tape If tape management data is present on the tape IMPORTANT NOTES: TAPE MANAGEMENT FUNCTION Setting the Tape Management Function 14 1 The TAPE MANAGE. setting is flashing. TAPE MANAGEMENT FUNCTION Tape Management Conflict Display PROTECT DAY CONFLICT REC PASS SET CONFLICT GROUP NO. CONFLICT NORMAL RECORDING Normal Recording 16 Before starting N NORMAL RECORDING Concerning the Number of Times Tapes can be Rerecorded on Changes to the Recording Speed Mode During Recording 2 Action to Take when the Video Signal Deteriorates NORMAL RECORDING Recording Check 18 1 Clog Detection AUTOREPEAT RECORDING Autorepeat Recording 1 The REPEAT indicator will light. 2 ALARM RECORDING Alarm Recording Setting 20 1 2 ALARM RECORDING Alarm Recording Counter Display Connections to the ALARM IN/OUT Terminals ALARM RESET IN terminal Checking the Alarm Recordings Time ALARM RECORDING Alarm Search 22 1 2 PROGRAM TIMER RECORDING Example 1: The timer recording indicator to Repeat steps 24 2 3 The day of the week of the 8th line is flashing. The recording start hour position starts flashing. 4 Setting the Holidays Changing a Program Timer Recording To Cancel a Program Timer Recording To Cancel all Program Timer Recordings PROGRAM TIMER RECORDING 26 RECORDING USING AN EXTERNAL TIMER INPUT Example 3: 2 3 4 SERIES RECORDING Series Recording Setup 28 4 2 SERIES RECORDING Continous Loop Recording Setup 2 3 Recording will start in series recording mode. SINGLE IMAGE RECORDING Single Image Recording Setup 30 1M 2M 3M F NORMAL PLA YBACK Normal Playback 1 2 3 The selected playback speed mode is displayed on the digital display. 4 SPECIAL PLAYBACK Picture Search (Forward and Reverse) 32 1 The image can be seen while the tape is advanced (or rewound) at high speed. SPECIAL PLAYBACK Day/Time Search 1 T/D SEARCH 01 00:00 will be displayed on screen. 2 TAPE COUNTER 1 34 2 3 SETTING THE BUZZER 1 2 3 CLOCK ADJUSTMENT SETTING THE RS-232C OR RS-485 DATA TRANSFER SPEED DIP Switches Setup 36 SW No. Example: CHECKING POWER FAILURE, FAILURE DUE TO CONDENSATION AND USAGE DURATION 1 2 OUTPUT TERMINALS TAPE END OUT Terminal 38 2 3 OUTPUT TERMINALS SW OUT Terminal The FIELD (or FRAME) setting is flashing. 2 3 OUTPUT TERMINALS REMOTE Jack 40 Remote control setting 1 HEADS SWITCHING FUNCTION SC Switching heads combination and azimuth display 1 2 3 MAINTENANCE Daily Inspection 42 Inspection Procedure 1 MAINTENANCE Maintaining and Checking The Mechanism Maintenance Table NOTE: RC4Q/U (TLS-9960 GB) Mon. Aug., 23/1999 TROUBLESHOOTING GUIDE After a Power Failure 44 System Down 1 2 SPECIFICATIONS General Specifications NOTE: Video Audio 46 OBLIGATIONS CUSTOMER INFORMATION 1-800-421-5013 Weekdays 8:30 AM 5:00 PM Pacific Time PARTS ORDER INFORMATION 1-800-726-9662 Weekdays 8:30 AM 5:00 PM Pacific Time EXCLUSIONS