AUTOREPEAT RECORDING

Autorepeat Recording

The same tape can be recorded over many times.
œFollow the Before starting steps, under “NORMAL
RECORDING”.
1Set the REPEAT REC switch to the “ON” position.
ø
The REPEAT indicator will light.
2Press the MENU button until the (SET UP 3) menu is
displayed.
@@@@@@@<SET@UP@3>
öALARM@MODE@@@@@@@Y1
öALARM@DURATION@@@20S
öEXT@TIME@ADJ.@@@@01:00
öTAPE@IN@MODE@@@@@STOP
öTAPE@END@MODE@@@@R1
öTAPE@END@OUT@@@@@-3M
öCLOG@DETECT.@@@@@Y
öSERIES@REC@IN@@@@N
öRS-232C@@@@@@@@@@19200
3Turn the JOG dial, until the “TAPE END MODE”
setting is flashing.
4Turn the SHUTTLE ring to set to “R 1” or “R 2”. (See
“Setting the Mode at the End of the Tape”)
5Press the SEARCH/AUDIO ON button to save the
setting.
6Press the REC/PLAY SPEED l (or j) button to set
the recording speed mode.
7Press the REC button.
ø
Recording will start. When the tape end is
reached, the VCR will rewind it to the beginning,
and recording will resume.
ø
When the end of the tape is reached, a buzzer
will be heard (if in the (SETUP 2) menu, in the
BUZZER section TAPE END is set to “Y”) and
“OFF” will be displayed until the rewinding
operation starts.
NOTES:
œIf during autorepeat recording there is an alarm trigger,
“AL” is displayed on the digital display and alarm
recording will take place. (Please refer to page 20,
“ALARM RECORDING”.)
œIf the “TAPE END MODE” setting is R 1, the REPEAT
indicator will go off if there is an alarm trigger. The
recording will continue to the end of the tape then it will
be rewound to the beginning and stop. “OFF” will be
displayed on the digital display. To turn off the buzzer
(if in the (SETUP 2) menu, in the BUZZER section
TAPE END is set to “Y”) and the “OFF” display, press
the STOP, EJECT or PLAY button, or turn the
SHUTTLE ring.
œIf “AL” is displayed on the digital display and the “TAPE
END MODE” setting is R1, autorepeat recording is not
possible.

Setting the Mode at the End of the Tape

In the (SET UP 3) menu, you can set the mode of the
VCR mode when the tape reaches the end during
recording.
1Press the MENU button until the (SET UP 3) menu is
displayed.
@@@@@@@<SET@UP@3>
öALARM@MODE@@@@@@@Y1
öALARM@DURATION@@@20S
öEXT@TIME@ADJ.@@@@01:00
öTAPE@IN@MODE@@@@@STOP
öTAPE@END@MODE@@@@REW
öTAPE@END@OUT@@@@@-3M
öCLOG@DETECT.@@@@@Y
öSERIES@REC@IN@@@@N
öRS-232C@@@@@@@@@@19200
2Turn the JOG dial, until the “TAPE END MODE”
setting is flashing.
3Turn the SHUTTLE ring, to set the desired mode.
œSetting when the REPEAT REC switch is set to the
“OFF” position.
REW. . . . . . . Rewinds the tape to the beginning,
then goes to stop mode
STOP. . . . . . Goes to stop mode
EJECT . . . . . The cassette is ejected
œSetting when the REPEAT REC switch is set to the
“ON” position.
R1 . . . . . . . . Autorepeat recording mode is
automatically canceled if there was
an alarm trigger
R2 . . . . . . . . Autorepeat recording mode is
active even if there was an alarm
trigger
4Press the SEARCH/AUDIO ON button to save the
setting.
RC4Q/U (TLS-9960 GB) Mon. Aug., 23/1999
English 19