AEG MCD2662E user manual Connecting the appliance to the power supply

36Installation

Important: Ensure the bottom of the oven is 85 cm or more above the floor.

It is important to ensure that the installation of this product conforms to the instructions in this operation manual and the conventional oven manufacturer’s installation instructions.

Connecting the appliance to the power supply

•The electrical outlet should be readily accessible so that the unit can be unplugged easily in an emergency. Or it should be possible to isolate the oven from the supply by incorporating a switch in the fixed wiring in accordance with the wiring rules.

•The socket should not be positioned behind the cupboard.

•The best position is above the cupboard, see (A).

•Connect the appliance to a single phase 230-240 V/50 Hz alternating current via a correctly installed earth socket.

•The power supply cord may only be replaced by an electrician.

•Before installing, tie a piece of string to the power supply cord to facilitate connection to point (A) when the appliance is being installed.

•When inserting the appliance into the high-sided cupboard, DO NOT crush the power supply cord.

•Do not immerse the power supply cord or plug in water or any other liquid.

(A)