Important safety instructions | 7 |
|
|
Children should be supervised to ensure that they do not play with the appliance. Do not lean or swing on the oven door. Do not play with the oven or use it as a toy. Children should be taught all important safety instructions: use of pot holders, careful removal of food coverings; paying special attention to packaging (e.g. self- heating materials) designed to make food crisp, as they may be extra hot.
Other warnings
Never modify the oven in any way.
This oven is for home food preparation only and may only be used for cooking food. It is not suitable for commercial or laboratory use.
To promote trouble-free use of your oven and avoid damage
Never operate the oven when it is empty except where recommended in the operation manual, see page 16 note 2. Doing so may damage the oven.
When using a browning dish or
Do not use metal utensils, which reflect microwaves and may cause electrical arcing. Do not put cans in the oven.
Only use the turntable and the turntable support designed for this oven. Do not operate the oven without the turntable.
To prevent the turntable from breaking:
a)Before cleaning the turntable with water, leave the turntable to cool.
b)Do not put hot foods or hot utensils on a cold turntable.
c)Do not put cold foods or cold utensils on a hot turntable.
Do not place anything on the outer cabinet during operation.
Do not use plastic containers for microwaving if the oven is still hot from using the GRILL mode, DUAL GRILL mode and AUTO COOK operation, because they may melt. Plastic containers must not be used during above modes unless the container manufacturer says they are suitable.
Important:
If you are unsure how to connect your oven, please consult an authorised, qualified electrician.
Neither the manufacturer nor the dealer can accept any liability for damage to the oven or personal injury resulting from failure to observe the correct electrical connection procedure.
Water vapour or drops may occasionally form on the oven walls or around the door seals and sealing surfaces. This is a normal occurrence and is not an indication of microwave leakage or a malfunction.
