Change of door opening direction
Should the
Appliances on the market are
Following operations are to be done on the basis of figures and explanations:
1.To perform the operations listed below it is recommended to ask another person for help who safely can keep the doors while perform- ing the operations.
2.Disconnect the appliance from the electricity
supply.
3. Open the doors and dismount the double door hinge (a,b) by removing the screws (2 pieces) (c). (fig. 2)
4.Take off the double door hinge (a,b,c) by grad- ually removing it from the cabinet, slightly tilting both doors. Do not forget to remove the plastic spacer (b) under the hinge. (fig. 2)
5. Take off the refrigerator door by pulling it slightly downwards.
6. Take off the freezer door by pulling it slightly upwards.
7. Unscrew the top door hinge pin (d) of the refrigerator then screw it back on the other side. (fig. 1)
8.Remove the insert of the plinth (e) by a screw- driver. (fig. 4)
9.Unmount the lower hinge pin (f) and its wash- er (h) and mount them on the other side. (fig. 4)
10.Replace the insert of the plinth (e) on the
other side.
11. Remove the covering nails (3 pieces) (n,k) of the double door holder on the left side and put them to the other side. (fig. 2)
12. Remove the (t, z) plugs from both doors. (fig. 3)
13. Remove the (u, v) door closing devices by unscrewing the (s) screw.
14.Unscrew the top handle bracket from the handle rod (1). Unscrew the bottom handle bracket from the door (2). Unscrew the top
44