■Setup Menu Description
● Presetting
(1)Position (POSITION SET)
Aligns the camera position and focal point by pan- ning, tilting, zooming and focusing.
See page 18 for the setting.
(2)Preset Identification (PRESET ID)
Assigns the name for preset IDs (identification of up to 16 alphanumeric characters) and can be switched on or off on the monitor screen.
See page 20 for the setting.
(3)Light Control (ALC/MANUAL)
Selects the ALC or MANUAL mode for adjusting the lens iris.
See page 21 for the setting.
(4)Dwell Time (DWELL TIME)
Displays the picture at each camera position for the selected duration.
You can select a preset duration from the menu. See page 21 for the setting.
(5)Scene File (SCENE FILE) Stores up to 10 files.
Each file has a set of detailed parameters for the shutter speed, AGC, electronic sensitivity enhance- ment, white balance, motion detector and AF mode. The scene files can be recalled later to reproduce the parameter settings under the same conditions as stored in the files.
See page 21 for the setting.
●Home Position (HOME POSITION)
The home position is the camera’s basic position.
The camera returns to this position automatically after a specific time following a manual operation. This setting functions only when AUTO MODE is OFF.
See page 23 for the setting.
SQ: Starts the sequence function.
SR: Starts the sort function.
PT: Starts the patrol function.
See page 23 for the setting.
●Auto Mode (AUTO MODE)
The auto mode is used for setting the movement of the camera.
You can select one of four automatic operation modes and one manual operation mode as follows:
OFF: No automatic operation. The camera can be oper- ated only manually.
SEQ: The camera operates in the sequence of preset positions in numerical order.
SORT: The camera operates in the sequence of preset positions counterclockwise from pan starting point.
AUTO PAN: The camera automatically turns within the preset panning range.
PATROL: The camera operates in the
See page 30 for the setting.
●Auto Pan Key (AUTO PAN KEY)
This setting assigns the SEQ, SORT, AUTO PAN or PATROL (PLAY) mode to the AUTO key on the con- troller.
After this setting, the AUTO key performs as assigned. Note: The AUTO PAN LED on the controller does not light if a mode other than AUTO PAN is assigned.
●Digital Flip (DIGITAL FLIP)
Tilt range is limited within 0 ° to 90 ° if OFF is selected. If ON is selected it widens the range up to 180 ° with the digital flip that reverses horizontal and vertical scan- ning when the camera is tilted beyond 90 ° point (Downright position if the camera is installed on a ceil- ing). Tilt range narrows from 0 ° to 90 ° if PAN LIMIT is set to ON.
●Self Return (SELF RETURN)
The self return function allows the camera to resume one of the operations described below after specified time.
This function automatically works after a lapse of setting time from manual operation finished.
OFF: Cancels the auto mode (SEQ, SORT, AUTO PAN and PATROL).
AT (the auto mode is set to OFF): Shifts the camera
direction to the home position.
AT (the auto mode is set to other than OFF):
Activates the auto mode.
HP: Shifts the camera direction to the home position.
AP: Starts the auto pan function.
●Password Lock (PASSWORD LOCK)
This menu limits setting changes.
●Special 1 Menu
(1)Privacy Zone (PRIVACY ZONE)
This setting is used for masking unwanted zones, hiding them from display on the monitor screen.
Up to 8 zones can be registered. Submenus are provided for zone number selection and parameter setting. See page 27 for details.
