ON: 10 - fold electronic zoom is available with the ZOOM switch on the controller.
OFF: The electronic zoom function is not used.
Notes:
•A scene magnified by the electronic zoom func- tion may be inferior in picture quality to a non- magnified one.
•The electronic zoom does not function in the pre- set position setting mode.
•To set preset positions directly from
●Preset Alarm (PRESET ALM)
An alarm output is sent when the camera moves to the designated position depending on the mode.
1.Move the cursor to PRESET ALARM and select ON or OFF.
** SPECIAL | 1 ** | ||
PRIVACY ZONE | OFF | ||
PROPO.P/T | ON | ||
AREA TITLE | ON(USER) | ||
PATROL | STOP | ||
ALARM IN/OUT |
|
|
|
CLEANING | OFF | ||
ON | |||
PRESET ALM |
| ON |
|
IMAGE HOLD |
| OFF | |
TILT ANGLE | 0° |
| |
RET |
|
|
|
ON: Alarm signals are output in the following cases.
•When a preset positioning sequence is complet- ed while AUTO MODE is set to SEQ.
•When a preset positioning sequence is complet- ed while AUTO MODE is set to SORT.
•When the
•Positioning is completed for a position request command.
•Positioning to the designated point is completed for ALARM IN/OUT.
•When positioning to the starting point is complet- ed while AUTO MODE is set to AUTO PAN.
•When positioning to the starting point is complet- ed while PATROL is set to PLAY.
OFF: Alarm signals are not output.
Note: Select OFF when the camera downloads or uploads the preset data.
●Image Hold (IMAGE HOLD)
The camera picture remains as a still image on the monitor screen until the camera reaches the preset position. This function is useful for surveillance via local area network.
1.Move the cursor to IMAGE HOLD and select ON or OFF.
** SPECIAL | 1 ** | ||
PRIVACY ZONE | OFF | ||
PROPO.P/T | ON | ||
AREA TITLE | ON(USER) | ||
PATROL | STOP | ||
ALARM IN/OUT |
|
|
|
CLEANING | OFF | ||
ON | |||
PRESET ALM | OFF | ||
IMAGE HOLD |
| ON |
|
TILT ANGLE |
| 0° |
|
RET |
|
|
|
ON: The last displayed still image is shown till the camera finishes moving to a preset position. However, the still image may be distorted with the effect of panning or tilting.
OFF: The current image is being displayed while the camera is moving to a preset position.
●Tilt Angle (TILT ANGLE 0 °/5 °)
You can select the tilting range.
1. Move the cursor to TILT ANGLE and select 0 ° or 5 °.
** SPECIAL | 1 ** | ||
PRIVACY ZONE | OFF | ||
PROPO.P/T | ON | ||
AREA TITLE | ON(USER) | ||
PATROL | STOP | ||
ALARM IN/OUT |
|
|
|
CLEANING | OFF | ||
ON | |||
PRESET ALM | OFF | ||
IMAGE HOLD | ON | ||
TILT ANGLE |
| 0° |
|
RET |
|
|
|
0 °: The tilting range is between 0 ° and 180 °.
5 °: The tilting range is between
