Panasonic WV-CW864A operating instructions Pan Offset, To Set the Lens Zoom and Focus Positions

3.Pan Offset

If the camera is replaced with a new one, the pan offset function is used to adjust its positions to be the same as before except patrol setting.

The system controller can download or upload the preset position data.

Caution: The preset data for other cameras (WV- CW654 for example) is incompatible with WV- CW864A’s. WV-CW864A’s preset data will be destroyed if you upload the conventional data. If this happened, reset the WV-CW864A to the default settings. Download the factory settings into the controller and upload the correct preset data newly to the initialized WV-CW864A.

(1) Display the PRESET NUMBER SET menu.

** PRESET NUMBER SET **

	1	*	2	3	4
5			6	7	8
9			10	11	12
13			14	15	16
17			18	19	20
21			22	23	24
25			26	27	28
29			30	31	32
	ID:
33-64			RET

(2)Select a position number for the picture to be most enlarged among the numbers with the joystick. Then press the CAM (SET) key. The position setting menu appears.

(3)Move the cursor to PAN OFFSET SET and select the right or left arrow with the joystick.

** POSITION 1***

PAN/TILT →PUSH SET ZOOM/FOCUS →PUSH SET

PAN OFFSET SET ← 0 →

RET

(4)Press the CAM (SET) key until the desired offset value appears.

(5)Move the cursor to an item other than PAN OFFSET SET, and press the MON (ESC) key.

Notes:

•Further adjustment of the other positions is unnecessary. This adjustment applies to all other positions.

•Make sure to move the cursor before pressing the key in step 5. Otherwise the settings will be ignored.

•Retry the loading when the camera fails to upload or download the data.

4. To Set the Lens Zoom and Focus Positions

(1)Move the cursor to PUSH SET for ZOOM/FOCUS and press the CAM (SET) key. The ZOOM/FOCUS setting menu appears.

** POSITION 1***

PAN/TILT →PUSH SET ZOOM/FOCUS →PUSH SET

PAN OFFSET SET ← 0 →

RET

(2)Select a zoom position by moving the zoom control up and down and a focus position by moving the focus control up and down, and then press the CAM (SET) key.

	** POSITION 1***
PAN/TILT		→PUSH SET
ZOOM/FOCUS		→PUSH SET
PAN	U ZOOM D/L FOCUS R			→
	OFFSET SET ←		0

RET

The positions are set and the screen returns to the position setting menu.

Notes:

•When the camera is used at a nearly horizontal angle, the focus may not be adjustable to a high level of accuracy.

•If you move the cursor to the position number and move the joystick right or left, the position number can be selected.

The selected preset position number can also be set after pressing the CAM (SET) key.

•The preset and camera IDs appear in the lower- left corner of the position setting menu after set- ting them.

5.Move the cursor to RET and press the CAM (SET) key to return to the preset setting menu.

** POSITION 1***

PAN/TILT →PUSH SET ZOOM/FOCUS →PUSH SET

PAN OFFSET SET ← 0 →

RET

-19-