(2)Move the cursor to ZOOM, press the CAM (SET) key, move the joystick to settle the ZOOM posi- tion and return to the AUTO PAN menu. The manual zoom operation is not available in the TELE direction beyond the settled zoom position.
| ** ZOOM LIMIT ** | |||
ZOOM |
|
|
| |
|
| →PUSH SET | ||
|
|
|
|
|
|
| U ZOOM D |
| |
RET
OFF: Does not limit the manual zoom operation.
Notes:
•When the panning, tilting, zooming or focusing in the SEQ, SORT or PATROL mode is controlled manually, the auto mode function should be can- celled.
To activate the auto mode, select the desired auto mode again or set a time for SELF RETURN in the SET UP menu.
•When 0S is selected, the camera stops without dwelling and starts.
•Auto refreshing may be activated during the patrol play or the auto mode to calibrate the lens position.
■Auto Pan Key Setting (AUTO PAN KEY)
This is used for assigning one of the following auto functions to the AUTO key on the controller. Pressing the AUTO key activates the assigned function after this setting.
•Move the cursor to AUTO PAN KEY and select an auto function with the joystick.
The factory default setting is AUTO PAN.
** SET UP MENU **
PRESET 1 MAP 
HOME POSITION OFF
SELF RETURN OFF
AUTO MODE OFF AUTO PAN KEY AUTO PAN DIGITAL FLIP ON SPECIAL1 
CAMERA
RS485 SET UP
PASSWORD LOCK OFF
The mode changes as follows:
SEQ 
SORT 
PATROL
AUTO PAN 
AUTO PAN: Assigns the auto panning function to the key.
SEQ: assigns the SEQUENCE function to the key.
SORT: assigns the SORT function to the key.
PATROL: assigns the PATROL PLAY function to the key.
Note: AUTO PAN LED on the controller does not light if something other than AUTO PAN is assigned. AUTO PAN does not stop with the AUTO PAN key.
If PASSWORD LOCK is set to ON, you cannot operate AUTO PAN, SEQ, SORT, and PATROL even by pressing the AUTO key.
■Digital Flip Setting (DIGITAL FLIP)
•Move the cursor to DIGITAL FLIP and select ON or OFF with the joystick.
** SET UP MENU **
PRESET 1 MAP 
HOME POSITION OFF
SELF RETURN OFF
AUTO MODE OFF AUTO PAN KEY AUTO PAN DIGITAL FLIP ON SPECIAL1 
CAMERA 
RS485 SET UP
PASSWORD LOCK OFF
OFF: The tilt range is limited from 0 ° to 90 °.
ON: The digital flip function allows the tilt angle to widen up to 180 °. The image on the monitor screen is flipped horizontally and vertically at the tilt angle of approx. 135 ° (If the camera is installed on a ceiling).
Note: The tilt range narrows from 0 ° to 90 ° if PAN LIMIT is set to ON.
Notes:
•Digital flip functions while moving the joystick down- wards. In case of moving the joystick to other direc- tions, it does not function.
•When OFF is selected for DIGITAL FLIP, the follow- ing operations are required to move the camera 180 ° vertically.
1)Move the joystick downwards to aim the camera down.
2)Move the joystick to the right or left to rotate the camera 180 ° horizontally.
3)Move the joystick upwards.
•To set the preset position directly from
Tilt range setting is disabled between 90 ° and 180 °.
