How to change the bulb
Should the light fail to work you can change it as below:
Disconnect from the electricity supply.
Press the rear hook (1) of the lam-
pcover by a screwdriver and at the same time pull and rotate the cover
in the direction indicated by the arrow (2). So the bulb can be replaced. (Bulb type: T25 Daylight
After changing the bulb replace the cover, snap it in place and reconnect the electricity supply.
Electrical connection
This refrigerator is designed to operate on a 230 V AC (~) 50 Hz supply. The plug must be put into a socket with protective contact. If there is no such, it is recommended to get an electrician to fit an earthed socket in compliance with standards near the refrigerator.
This appliance complies with the following E.E.C. Directives:
73/23 EEC of 19.02.73 (Low Voltage Directive) and subsequent modifica- tions,
89/336 EEC of 03.05.89 (Electromagnetic Compatibility Directive) and subsequent modifications.
-96/57 EEC - 96/09/03 (Energy Efficiency Directive) and its subsequent amendments
27
