ENGLISH 19
1)In case of error message on the display (e.g. E51- only tumble dryer with the display): Switch the tumble dryer off and on. Set programme. Push the Start/Pause button. Does not work? - inform local service and quote the error code.
2)follow programme recommendation - see PROGRAMMES chapter
3)see CARE AND CLEANINGchapter
4)see section MACHINE SETTINGS in HINTS AND TIPS chapter
5)only dryers with the display
6)Only dryers with drum light.
7)Note: After maximum 5 hours the drying cycle ends automatically (see Drying cycle complete section).
SERVICE
If there are technical faults, first check if you can remedy the problem yourself with the help of the operating instruc- tions - see section TROUBLE SHOOTER If you cannot remedy the problem on your own, get in touch with the Cus- tomer Care Department or one of our service partners.
To assist you quickly, these data are necessary:
–Model name
–Product number (PNC)
–Serial number (Ser. No. is on rating plate attached to the product - to find it see chapter PRODUCT DESCRIPTION))
–Type of failure
–Any error messages shown by the dis- play.
So that you have the necessary refer- ence numbers from your appliance at hand, we recommend that you write them in here:
Mod..................................
PNC:.................................
Ser. No. .................................
